Remco AquaJet 5.3 GPM Variable Speed Water Pump
Description / Remco AquaJet 5.3 GPM Variable Speed Water Pump
Because of the powerful “just like home” performance offered by the Power RV Aquajet, leading RV manufacturers including Monaco Coach, Fleetwood, Airstream, Newmar, Foretravel and Country Coach were among the first to upgrade their high-end water systems by including our Aquajet RV pumps as standard equipment.
Pump -
Type: 5 chamber diaphragm pump, self priming, capable of being run dry
Certifications : IAMPO/NSF
Liquid Temperature: 140°F (60°C) Max.
Priming Capabilities: AES: 10 feet (3 m)
ARV: 13 feet (4 m)
Max Pressure: 60-75 PSI (4.4-5.2 bar)
Inlet/Outlet Ports: Remco Quick Attach
Valves: Viton
Diaphragm: Santoprene
Switch: Demand/Bypass
Weight: 8 lbs (3.6 kg)
Motor -
Leads: 14 AWG, 12” long
Temperature Limits: If the heat sink rises above 185°F (85°C), an auto reset thermal protector will shut down the system, allowing the components to cool.
More Information
Item # | 88895 |
---|---|
Brand | Remco Industries |
Series | PowerRV |
Model | 55-AQUAJETARV |
Voltage | 12V DC |
Flow Rate | 5.3 GPM |
Max Amp Draw | 10A |
Pressure | 60-75 PSI |
Included | (1) Pump (2) Remco Quick-Connect x Threaded 1/2 Inch Male Qest Fittings |
Dimensions | Overall: 8.89" L x 4.84" W x 4.60" H See Picture # 6 for a specific diagram. |
Made in | USA |
Special Order Item | No |
UPC | 765053804530 |
LTL Freight | No |
Customer Reviews
We bought this pump to replace a Shurflo Extreme Smart Sensor 5.7 that quit (second one in four years.)
We used our OEM pump while waiting for this replacement. Using the OEM reminded us why we buy better water pumps, low pressure, low flow, constant on/off surging.
The AquaJet 5.3 was easy to install. It produces a good, constant flow with good pressure. It makes our shower as good or better than many hotel or campground showers.
We hope it lasts longer than the ShurFlo pumps.
I did have to wire a relay to prevent voltage drop, since the new pump draws several more amps at full output. My particular installation was very easy due to the power center being located right above the utility area of my unit. I had an open circuit in my power center and my completed installation looks original. I used the original pump's wiring to trigger the relay, everything works great. Any of the 3 pump switches of my unit can turn it on just like before.
Dyers shipped the unit very quickly and their price was the best I found online. I have made several purchases from them with no problems whatsoever.