PullRite Industry Standard 20K SuperGlide 5th Wheel Hitch

I have used this for 2 1/2 years. Had NEVER towed ANYTHING before. I love this hitch. Watch video for more details.

Bought this hitch one year ago. Easy to install slick design, I thought it was the best hitch for a self sliding hitch for a short box truck..
That was untill I used it for the first time put less then 8,000 km on the hitch. Pulled my 36' toy hauler across Canada though Rocky Mountains on majour well maintained Highways. Good miles to test the hitch and as I was leaving my driveway for my next trip the roller assembly snapped.

( this roller assembly is a 3/4" stud with a roller that holds the hitch strait and also directs the hitch to glide back as you turn in the slots.)

Company blames owners for not lubricating slide tubes and plastic glides properly (which in this case was lubricated as recommended) hitch was not binding or jamming in any way shape or form!!! .. This is a complete farce. There recommended lube is WD40 and has no recommendations to lube this assembly which broke. So beware your 18,000lbs trailer is being held on this hitch and being kept from flopping around uncontrollable by a single 3/4" diameter bolt. Serious design flaw. Read other RV forums and there's been others who lost the trailer off these hitches. if I would have known that this one roller assembly (3/4" bolt) was the major piece holding 18,000lbs from going out of control I would never ever have bought this hitch, so luckily this happened at low speed; And I noticed it. If not the hitch would have slid to the back which is still attached in the slide rails but if you had to make an emergency stop it has about 18" of room to slam forward which would most likely shear the two bolts at the front that are holding the rails down, and next would be in the back of your cab where you and your family reside!!!!
SO BE AWARE

By far the best short bed hitch I have owned! No more worries about denting the cab of my truck, works great!!!

I am very pleased with hitch. I did a lot of research and everything was as expected. I bought the industry standard rails along with the custom frame brackets. I installed everything myself in my 2014 GMC 2500 HD. I pull a Keystone Laredo 292RL with no problems at all.

Like others I bought this and it was too tall. I ended up getting the supper rail system and it works great. I just wish I would have seen the reviews earlier.

Product works effortlessly, smooth action when turning, nothing to worry about with this industry standard automatic sliding hitch. But the height is not standard. The same height as the bed of my truck, 20 inches from floor to bedrail. It makes any 5th wheel to high to pull. Get the one with the SuperRail system.

Bought this model because it said industry standard. I advise don't waste your money on this one just get the 18k slide without industry standard. This one sits 5 inches higher and no adjustments. You can't return because shipping would kill you. And the non industry standard is cheaper you just have to buy rail system. If I had to do it over again, I would get the other one. If dyers would work with me on shipping, I would exchange in a heartbeat...