MB Sturgis 36" RV Type1 X Inverted Flare Pigtail with Stainless Steel Overbraid
MB Sturgis 36" RV Type1 X Inverted Flare Pigtail with Stainless Steel Overbraid
Used to connect a dual LP Cylinder system to the Two-Stage Regulator.
**Image may differ from actual product.**
Item #
84353
Special Order Item
No
Ships LTL Freight
No
5+ In Stock
$25.71
Description / MB Sturgis 36" RV Type1 X Inverted Flare Pigtail with Stainless Steel Overbraid
The MB Sturgis Type 1 provides a higher rate of flow resulting in a decreased potential for the system to go into bypass mode and therefore shutting down the gas supply to the system.
The MB Sturgis RV Type 1 (Dark Green) includes an internal back check to ensure the system does not allow a back flow gas leak. Provides a higher flow rate to avoid going into by-pass mode, a back check to completly stop any potential back flow leakage and has a heat sensitive thermal shut-off device to shut off the gas in extreme heat situations.
The MB Sturgis RV Type 1 (Dark Green) includes an internal back check to ensure the system does not allow a back flow gas leak. Provides a higher flow rate to avoid going into by-pass mode, a back check to completly stop any potential back flow leakage and has a heat sensitive thermal shut-off device to shut off the gas in extreme heat situations.
More Information
| Item # | 84353 |
|---|---|
| Brand | MB Sturgis |
| Model | 100699-36 |
| Hose Length | 36" |
| LP Hose Fitting Type | 1/4" Male Inverted Flare, Type 1 ACME |
| Features | MAX FLOW CAPACITY - 200,000 SCFH TEMPERATURE RANGE - -40ºF to 140º (-40ºC to 60ºC) CERTIFICATION - UL569 / ANSI Z21-81 Used for LP Gas Only Compatibility: LP Gas Trunk Hose End Type1: Acme Nut End Size2: 1/4 Inch End Type2: Male Inverted Flare With Thermal Protection: Yes UL/CGA Approved: Yes |
| Included | (1) Gas Pigtail Hose |
| Dimensions | RV Type 1 X 1/4" Inv. Flare Pigtail Diameter: 3/8 Inch Length: 36 Inch |
| Made in | USA |
| Special Order Item | No |
| UPC | 764560528359 |
| LTL Freight | No |
Customer Reviews
Quality
5
Price
5
Value
5
Replacement for Carrier Air V
Review by
JohnP
A week after relocating to hot Texas in our motorhome, the front Carrier Air V unit starting making noise. A service call from a local company verified it was the squirrel cage blower. The part had stress cracks all over it and had become unbalanced to the point it made a horrible noise. It was just a matter of time before it would have completely disintegrated and/or ruined the fan motor. I was informed that Carrier parts were non-existent since Carrier abandoned all of its RV A/C manufacturing, and that a full replacement would be necessary. That just wasn't an option on many levels. After an exhaustive search for a replacement squirrel cage, I found this part from Dyers. The other comments say it all! It fits the motor shaft and housing perfectly. A $30 part or a $3000 A/C replacement. You make the call! As someone else here said, I will be ordering another one for the rear A/C unit as it's just a matter of time before it fails too. Shipping was fast! Thanks Dyers!
Write Your Own Review