Irvine Shade 1-1/4" Extra Small Slow-Rise Spring

Irvine Shade offers a total of 13 different spring sizes for the different types and sizes of roller shades they manufacture. To determine which spring you need please follow the instructions below.

1. TUBE DIAMETER: Measure the diameter of the tube your springs fits into on your roller shade.  Irvine Shade only makes 3 tube diameter sizes: 3/4" and 1" (Valu-Line Series) and 1-1/4" (Slow-Rise Series). PLEASE NOTE: Some roller shades in your RV may have different tube diameters depending on what was available when the shades were originally installed, so if you are replacing multiple springs you will need to measure each tube individually and order accordingly.
2. WIDTH OF SHADE: Measure the width of your shade from side to side. The wider the shade, the longer the spring you will need to properly accommodate your roller shade. Again, if you are replacing multiple springs, please measure each shade individually to ensure you are ordering the correct size spring.

IMPORTANT NOTE: For ORIGINAL SLOW-RISE SHADES made between 2013 until mid-2017, the replacement springs on our website for the SLOW-RISE SERIES will not be a smooth fit. Some slight modifications must be made which entail sanding down one area on the spring assembly in one spot for the spring to fit. We do NOT recommend doing this on your own, instead please consult an experienced, professional roller shade technician BEFORE attempting to make this modification on your own. ANY MODIFICATIONS MADE TO THESE SPRINGS AND ANY SIGNS OF USE OR ATTEMPTED INSTALLATION WILL RESULT IN A DENIED RETURN.

If you have any questions or concerns about ordering the correct spring, please contact us directly at support@dyersonline.com for assistance.