Atwood Fan-Tastic Vent Dome Lock Kit
Atwood Vent Dome Lock Kit For Fan-Tastic Vents.
- Item #
- 90644
- Color
- Black
- Special Order Item
- No
- Ships LTL Freight
- No
5+ In Stock
$22.98
More Information
| Condition | New |
|---|---|
| Item # | 90644 |
| Brand | Fan-Tastic Vent |
| Model | K4021-09 |
| Color | Black |
| Included | Dome Latch Assembly: (1) Lock Cam Shaft (1) Lock Latch (1) Lock Knob (1) Metal Washer (1) Screw 4 x 1/2" Flat T/S Blk Dome Latch Catch: (1) Metal Washer (1) Plastic Washer (1) Screw #6 x 1/2 PH Truss Head T/S (1) Lock Arrow Sticker |
| Dimensions | Lock Cam Shaft: 1 7/16" x 3/8" Lock Latch: 1 1/8" x 7/8" x 5/8" Lock Knob: 15/16" x 11/16" x 3/8" |
| Net Weight | .05 |
| Gross Weight | .05 |
| Special Order Item | No |
| LTL Freight | No |
Product Questions
Customer Questions
Product Attachments
Reviews Summary
4
(18)
Good quality replacement part that fits well and is sturdier than the original. However, it is still made of plastic.
Loading...
Customer Reviews
Quality
5
Value
1
Price
1
Right Part - HighPrice
Review by
Stubby
Right Part - HighPrice
Quality
4
Value
3
Price
3
Looks like the factory original. Seems to work fine.
Review by
Bob
Good replacement part for the factory original. Prompt delivery.
Quality
5
Value
5
Price
5
Perfect just what we needed.
Review by
Happy Camper
Ordered the Atwood Dome Lock Kit for the FanTastic fan vent in our travel trailer. The original lock had failed. This replacement lock kit was a perfect fit and I believe the part was sturdier than the original; it’s still plastic though. It was easy to remove the old and install the one lock. I did buy an extra one so we have it on board just incase we need it.
Quality
5
Value
5
Price
4
Fan-Tastic Vent K4021-09 Black Dome Lock Kit
Review by
GW
Exact Vent-Cap-Lock Replacement for the Dometic-Roof-Vent-Fan FV1250 FV1251XBTF81 (mfg-09-2020)
Quality
5
Value
5
Price
5
Exactly what we needed !
Review by
Happy Camper
The dome lock on our travel trailer’s FanTastic vent fan broke (the knob cracked in pieces as well as the part that hooks to the dome). These are all plastic parts . The kit received from Dyers was still plastic however it seemed substantially sturdier than the original part. It was easy fix with the vent dome opened. It is a two person job one person on the roof to pull the broken part out and to push the new part in place with the other person to help get the end of the new part through the hole and fasten the knob in place. The person on roof needs to make sure the part is in the open position so the knob can be attached in the open postion.
Quality
5
Value
5
Price
5
I only needed the knob but worked out fine
Review by
ray
All good
Quality
5
Value
5
Price
5
Price was fair, shipping was a little high, almost half the cost other part.
Review by
Rick
The part appears to be good quality. It is two pieces, instead of the original three-piece part. That should reduce the risk of breaking considerably.
Quality
3
Value
3
Price
3
Works
Review by
Fit ok
Fit same as original. Not an upgrade
Quality
5
Value
4
Price
3
A little overpriced and tricky but it works
Review by
DaveJ
Seems like a simple part like this could cost a little less. I've replaced these before, they are a bit tricky to remove and install, mainly in terms of orientation relative to the locking pin on the vent cover. But, it works.
Quality
1
Value
1
Price
1
Great customer service, very bad product
Review by
Mike
The parts were expensive considering the manufacturing cost was probably about $1 but I accept that, it can be difficult to find specialised parts.
I fitted it successfully and everything looked good but the following morning I found it had snapped at the top. I fashioned an aluminium piece to fit onto the original plastic shaft and used the lock handle from this kit to replace the one missing from mine, it fitted well but.. (you guessed it..) I found it had broken the following morning. As a retired plastic component designer I can say that the grade of plastic is clearly not able to withstand any stress (it needs a glass fibre filler to be effective) and the latch itself is a poor design. Save your time, don't buy it. I must say that the customer service from Dyer was EXCELLENT! They refunded my money quickly and without question, I would definitely use them again.
I fitted it successfully and everything looked good but the following morning I found it had snapped at the top. I fashioned an aluminium piece to fit onto the original plastic shaft and used the lock handle from this kit to replace the one missing from mine, it fitted well but.. (you guessed it..) I found it had broken the following morning. As a retired plastic component designer I can say that the grade of plastic is clearly not able to withstand any stress (it needs a glass fibre filler to be effective) and the latch itself is a poor design. Save your time, don't buy it. I must say that the customer service from Dyer was EXCELLENT! They refunded my money quickly and without question, I would definitely use them again.
Write Your Own Review