Esco LYGHT 30A Relay Base Automatic Transfer Switch
Esco LYGHT 30A Relay Base Automatic Transfer Switch
Automatically switches from power cord to generator simply by starting the generator. 30A 120V Relay Base.
Item #
12987
Special Order Item
No
Ships LTL Freight
No
5+ In Stock
$139.99
Description / Esco LYGHT 30A Relay Base Automatic Transfer Switch
The LPT30 is intended for usage as an electrical transfer switch to automatically switch multiple sources (from one to another), i.e. switching from shoreline to generator power or switching from electronic inverter to shoreline/generator.
The LPT30 is primarily designed for installation in conjunction with a generator having a rated output of not larger than 4.5kw, an external power cord having a rated output of not larger than 120VAC, 30A, 1PH, 60HZ and an electronic inverter having a rated output of not larger than 3600 watts.
Contractors: General purpose DPDT 30 amp relay
Coil: 110VDC, 2 watts
Time Delay: Custom time delay, 30 seconds nominal may bypass time delay with switch on board
Physical Size: 6" x 6" x 3"
Knockouts: 1/2" and 3/4"
Cautions:
Install vertically or horizontally in a dry, accessible area.*Maximum service 120 VAC, 30AMPS single phase: must be used with a circuit distribution panel having a main breaker rated 30AMPS-1 Pole, or less. Suitable for installation in conjunction with power supplies having rated outputs not larger than 120VAC, 30AMPS.
The LPT30 is primarily designed for installation in conjunction with a generator having a rated output of not larger than 4.5kw, an external power cord having a rated output of not larger than 120VAC, 30A, 1PH, 60HZ and an electronic inverter having a rated output of not larger than 3600 watts.
Contractors: General purpose DPDT 30 amp relay
Coil: 110VDC, 2 watts
Time Delay: Custom time delay, 30 seconds nominal may bypass time delay with switch on board
Physical Size: 6" x 6" x 3"
Knockouts: 1/2" and 3/4"
Cautions:
Install vertically or horizontally in a dry, accessible area.*Maximum service 120 VAC, 30AMPS single phase: must be used with a circuit distribution panel having a main breaker rated 30AMPS-1 Pole, or less. Suitable for installation in conjunction with power supplies having rated outputs not larger than 120VAC, 30AMPS.
More Information
| Item # | 12987 |
|---|---|
| Brand | ESCO |
| Model | LPT30 |
| Input | 120VAC, 30A, 1PH, 60HZ |
| Amperage | 30 Amp |
| Dimensions | 6" x 6" x 3" |
| Warranty | 1 Year |
| Net Weight | 6.6 |
| Special Order Item | No |
| UPC | 765053221320 |
Product Attachments
Write Your Own Review
WARNING: This product can expose you to chemicals, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.