Dometic 9100 Power Awning Arm and Hardware Assemblies

The 9100 Power Awning is a value leader that compliments any RV.

Available in 3 different pitches, Reduced, Standard or Basement, and in 2 different colors; White or Black.

The Reduced and Standard awning arms have a back channel length of 65-1/2" while the Basement awning arms have a back channel length of 62-1/4".

Reduced awning arms have a 2 degree pitch, Standard awning arms have a 13 degree pitch, and Basement awning arms have a 20 degree pitch. The pitch is how much the roller tube drops as the awning is extended.

8952001.400(X)(L) Basement Model
8952002.400(X)(L) Standard Model
8952003.400(X)(L) Reduced Model
*(X) represents the color code for the hardware. "B" is for White and "U" is for Black.
*(L) indicates that the hardware is pre-wired for LED awning lights. The hardware does NOT come with LED lights, it only comes with the wire that connects to your PRE-EXISTING 9100 Series LED awning lights.

IMPORTANT NOTE: Dometic is now only selling the hardware that comes with the LED Wiring Harness. If you do NOT have LED lights on your 9100 Series power awning, you will need to order the hardware that comes with the LED Wiring Harness and when you install your new hardware, you will just remove that wire.

HOW TO ORDER:

1. Select what color you want. Black or White.

2. Select the wiring harness option you need.

3. Select the hardware size you need.
Basement = 62-1/4" Back Channel Length w/ a 20° Pitch
Standard = 65-1/2" Back Channel Length w/ a 13° Pitch
Reduced = 65-1/2" Back Channel Length w/ a 2° Pitch

*Color shown is White and will vary depending and what you select*
**This is only the arms and hardware assembly. The Roller Tube Assembly is NOT included**